Shoe GOO is the #1 shoe repair adhesive! It is a no-mess, permanent repair and preventative maintenance adhesive. Repairs damaged heels, secures loose insoles and coats frayed laces. Get your best shoes back in shape for continued use!
The unique formula is designed for strong abrasion resistance and better adhesion to flexible materials.
Most of the Shoe Goo products in this listing are transparent, so you can use it with any of your footwear.
Volume Guide:
5.3ml good for touch ups (area less than 4cm sq)
29.5ml good for 1 average size sole
109.4ml good for up to 4 average size soles
Sub-Variations:
Comes in 5.3ml (0.18oz)(no packaging), 5.3ml (0.18oz)x4 tubes, 29.5ml (1oz) & 109.4ml (3.7oz) tubes and dries clear.
Black 109.4ml - Dries Black and is good for application on black coloured footwear
Shoe Goo II (26.6ml)
Shoe GOO ll, formulated using a premium polymer technology, offers virtually the same performance characteristics you love with Original Shoe GOO, now with LOW ODOR! It is crystal clear and offers superb UV and water resistance. Permanently repair/protect all types of footwear!
Shoe Goo Boots & Gloves (59.1ml)
Shoe GOO Boots & Gloves provides a thick protective coating that extends the life of footwear and gloves. The unique formula does not become brittle in cold weather and remains flexible once cured. A coating of Shoe GOO Boots & Gloves will make your footwear and gloves last longer! Recommended for top part of boots or on gloves.
Made in USA
Follow these step-by-step directions when using Shoe GOO:
Read directions and test small area before use.
1. Surface should be clean, dry and free of dirt.
2. Puncture seal in neck of tube using pointer cap. Ideal application temperature range is 10 to 32 ºC.
3. Apply directly to surfaces to be protected, bonded or repaired. For waterproofing and protecting, use thin coats (spread with a disposable tool) to build a thick coating, allowing each layer to set 3-4 hours. Make sure all points are fully in contact during curing.
4. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
6. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.
FAQ:
How long does SHOE GOO take to cure?
A full cure takes 24 to 72 hours, depending on the surrounding environment. To speed drying time, apply heat using a handheld dryer set on low. Hold dryer at least 15cm from the surface.
How can SHOE GOO be cleaned up?
Small amounts of acetone or citrus-based solvents may be used on uncured adhesive; the adhesive will ball up and brush off. Cured adhesive may be removed by cutting or scraping.
