This bottle carrier is made from 550 (4mm) paracord, woven together to form a handle that is beautiful, strong and comfortable to hold. This contraption allows you to retrofit your water bottle, Nalgene or any other model so you can carry it from the top.
Specifications:
ALL Bottles with mouth ranging from 20mm to 85mm in diameter
There is an included rubber ring to fit 63mm wide mouth bottles, but it is a redundant securing point, please see guide below
Items Included:
1 x Paracord Handle made from Paracord
1 x Rubber Ring
1 x Carabiner (Silver finish)
1 x Buckle (to open and add in other items to handle)
1 x Cord Toggle (To tighten cord in place)
Available in solid Navy only, is the Shoulder Strap. In addition to being a carry handle, there is additional length that can make it shoulder carry. It is appx 45cm in length.
For simple reference, bottle will be a waist level for most children.
*****Step-by-Step Guide on how to retrofit your Nalgene Water Bottle (for 1l & 1.5l Wide Mouth, OTF and any bottle with a 63mm diameter mouth):******
Step 1: Open the toggle to the max, allowing you the most string length to fit in. (refer to picture 4)
Step 2: Slot the bottle cap through the cord part of the handle, do note cord only, not the rubber loop (refer to picture 5)
Step 3: Fit the string below the cap loop, so from top to bottom it is (refer to picture 6):
a. Rubber Loop
b. Bottle Cap Loop
c. String
Step 4: Once in position, tighten string below the cap loop using toggle. The rubber loop will rest directly under the moulded circle (the part that separates threaded mouth to rest of bottle). This creates a snug solid fit even when bottle is fully laden, whether cap is open of closed.
*****Step-by-Step Guide on how to retrofit ANY BOTTLE mouth that is not 63mm in diameter:*****
Step 1: Cut off the rubber ring. It is joined to the handle at 2 points. The ring is a redundant feature to secure the bottle and the bottle is still firmly secured because the string will tightened under load, making it unlikely to slip out of position.
Step 2: Open the toggle to the max, allowing you the most string length to fit in. (refer to picture 4)
Step 3: Tighten the cord around the bottle's neck by pressing on the toggle and moving it to as close to the bottle as possible before releasing the button. The bottle will be secured firmly when placed around the narrowest part of your bottle's mouth.
Refer to last 2 pictures of the product for illustration on how it should look like when secured and ready for use.
We are a Singapore-based seller. Picture of Nalgene Bottle(s) are for illustration purposes only and it is not included with handle.
*If you have a bottle that is perfectly flushed or thinner at the drinking area than at the body, this handle most likely cannot be installed on your bottle.
*There maybe slight variations in colour or pattern between stock picture and actual product due to various reasons
